Precautions for daily use of the stator
2023-01-04
The daily use of the stator winding machine has been a headache for people, then Taizhou Yangnuo Mould Co.
First, the structure of the stator and rotor
Stator winding machine is simple and convenient, and can be used for punching and cutting tensile test pieces and other test pieces of various shapes.
The stator winding machine is mainly composed of motor seat platform, cylinder, air valve and air compressor (optional).
Motor punching piece and the seat of the fit is interference, the motor rotor and shaft fit should also be interference; motor punching piece itself can only say the processing size of the mold, to 180 machine seat for example processing size is 290, tolerance is +0.085 +0.011, then the design of your mold size will have to take in the middle of this tolerance and then fine 1 level of accuracy.
Second, the use of stator winding machine
Put the cutter in the lower end of the incoming shaft, so that the cutter blade plane parallel to the seat platform, (the seat platform needs to be put on the pad) open the valve, you can punch and cut into standard specimens.
Third, the motor stator and rotor punching sheet in the use of precautions
1, the motor punching piece is more complex electromechanical integration equipment, to be operated by a person, non-operators please do not randomly open the equipment.
2, the mainframe torque motor on the connecting rod bearings need to be regularly refueled, generally 2 to 3 months to refuel once, the three connecting body on the oil mist about a year need to check the oil storage capacity. Lower than the oil level line need to refuel, generally add to 2 / 3 height.
3, the machine should be often open, especially in the rainy season.
4, do not casually open the motor punch sheet shell to touch the components, so as not to electrostatic breakdown components, especially the personnel wearing chemical fiber clothing and pants.
Previous page
01-04
Carbon fiber tube winding mold forming process
Carbon fiber tube production process is one of the more mature production methods, the quality of carbon fiber tube products made by this process is better than other processes.
01-04
Precautions for daily use of the stator
The daily use of the stator winding machine has been a headache for people, then Taizhou Yangnuo Mould Co. First, the structure of the stator and rotor Stator winding machine is simple and convenient, and can be used for punching and cutting tensile test pieces and other test pieces of various shapes.
01-04
So independent suspension must be independent? Some multi-links are not purely independent suspensions if strictly differentiated as required. Because the independent suspension is based on the fact that the two wheels operate independently and do not interfere with each other, but in some models, in order to prevent the lateral displacement of the independent suspension, a lateral stabilizer bar is added between the two wheels.
01-04
Top ten common brake system failures and solutions
Whether the brake system is fault-free or not directly determines our life safety. Its performance cannot be determined because the production design has been fixed. We must ensure that it can operate normally without failure. So what are the faults that the brake system often causes? What are the symptoms when you brake?
Mobile website
Yangnuo
Copyright @ 2022 tzynmould.cn All Rights Reserved. Powered by www.300.cn
